Home Forums General 107E Prefect Anglia wiper motor

  • This topic has 1 reply, 2 voices, and was last updated 4 weeks ago by JAN.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #75786

    Hi thinking about changing my vacuum wipers for a electric wipers off a Anglia there are 3 wires coming from the rear one black Screwed to the casing and two black and white both in a bullet connection just wanted to test it for working first before I go any further plus on the back cover there’s a dial printed on the casing and a dot on the cover wondering if that’s for different settings? Any ideas much appreciated


    That’s not a good system to use. The 105E spindles are short as the scuttle where they emerge for the car’s interior is in the same plane as the screen; the 100E spindles are at an angle to the screen so the spindles are longer and use triangular spacers inside and outside the car. These will not fit on to the wiper spindles so the angles will be all wrong.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.