Home Forums General Technical Help engine strip down

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #78190
    cwollen
    Participant

    Have started the strip down and found that the pistons are plus 30 . The question I have on all pistons the top piston ring is in two halves, all of the top rings are in two equal parts so I don’t think they have snapped ??

    top ring two halves
    middle ring complete with single cut to enable fitting/expansion
    bottom ring in three parts

    anyone to help

    thanks

    #78191
    JAN
    Participant

    They have snapped. You don’t get piston rings in two halves, they wouldn’t do their job.

    #78192
    cwollen
    Participant

    thanks if the pistons are +30 I assume I need +30 rings

    #78194
    member2617
    Participant

    Depends on the condition of the pistons, plus the bores etc.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.