Home Forums General Technical Help Hi Beam problem

This topic contains 4 replies, has 3 voices, and was last updated by  JVMP 1 week ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #64338

    JVMP
    Participant
    Club Member

    Hello,
    I have the following problem. main lights L+R work ok. but as soon as I pull the hi beam leaver the relais is activated and the left hi-beam comes on, but the right hi-beam does not and turns of the right main headlight. the dashboard light works fine. Any idees anyone.
    1966 Anglia Torino. Tx Jan.

    #64339

    JAN
    Participant

    I’m not entirely certain, but I suggest you check that there is a good earth (ground) to the right side.

    #64344

    PeterDenice
    Participant
    Club Member

    Is it just a simple case that the right hand main beam filament has blown.
    when you switch over to high beam I am sure the main beam goes off, I don’t think they are both on

    #64347

    JVMP
    Participant
    Club Member

    I can clearly see that the light intensity is stronger on the lefthand side when I pull the hi-beam lever, but on the righthand side I have no light whats so ever. The bulb is new.

    #64348

    JVMP
    Participant
    Club Member

    hi, yes you where both right, the main beam turns off when you activate the hi-beam, and yes there was a problem with the – cable. all sorted now. thanks for the suggestions.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.