Home Forums General Technical Help Horn problems

This topic contains 1 reply, has 2 voices, and was last updated by  peteleo 2 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #63948

    Club Member

    Does anyone know how to improve the circuit between the horn push button and the horn itself?

    The horn works fine when connected direct to a battery but is very low and intermittent when the push button is used.

    Someone suggested a relay or something in the wiring but I am at a lost what to do.



    The original 105E horn has a square screw tone adjuster. Have someone hold down the horn button while turning the screw CW or CCW.

    There is a sweet point between when the car idles, lower battery voltage, to high rpm, higher battery voltage, assuming you have a generator.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.