Home › Forums › General › Technical Help › Removing Carbon

  • This topic has 1 reply, 2 voices, and was last updated by tom1946.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 3, 2010 at 12:48 pm #12303
    Anonymous

      hello,
      Can anyone tell me the best way for removing carbon from the engine (e.g valves, head ect) as we want to get them as clean as possible before re-assembling

      Thanks Malc :D

      April 6, 2010 at 10:36 am #23328
      tom1946
      Participant

        Hi, a rotary wire brush attachment always works well for me, for those awkward little places in the throats just gentle and careful use of a scraper.

        HTH, tom.

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.